MAIN PUBLICATION :



Home » ENVIRONMENT » Environmental impacts » Offshore Impacts

Impacts on birds

Wind farms, as vertical structures with mobile elements, may represent a risk to birds, both as residents or migratory birds. It is difficult to give a clear opinion about the impacts of wind energy on birds for several reasons:

  • Impacts are very site dependent (landscape topography, wind farm layout, season, type of resident birds in the area, migratory birds, etc).
  • Impacts vary among the different bird species.

The types of risks that may affect birds are:

  • Collision with turbines (blades and towers) causing death or injury.
  • Habitat disturbance. The presence of wind turbines and maintenance labours can displace birds from preferred habitats. The breeding success rate may be reduced.
  • Interference on birds' movements between feeding, wintering, breeding and moulting, which could result in additional flights consuming more energy.
  • Reduction or loss of available habitat.

The main factors which determine the mortality of birds by collision at wind farms are landscape topography, local winds characterised by direction and strength, turbine design characteristics and the specific spatial distribution of turbines on the location. (De Lucas, in press). Specific locations should be evaluated a priori when a wind farm is planned. Every new wind farm project must include a detailed study of the interaction between birds' behaviour, wind and topography at the precise location. This analysis should provide information to define the best design of the wind farm to minimise collision with the turbines. Raptors present a higher mortality rate due to their dependence on thermals to gain altitude, to move between locations and to forage. Some of them are long lived species, with low reproductive rates and thus more vulnerable to loss of individuals by collisions.

The mortality caused by wind farms is very dependent on the season, specific site (e.g. offshore, mountain ridge, migration route), species (large and medium vs. small and migratory vs. resident) and type of bird activity (e.g. nocturnal migrations, movements from and to feeding areas).

Bird mortality seems to be a sporadic event, correlated with adverse weather or poor visibility conditions. Results from Altamont Pass and Tarifa on raptors showed some of the highest levels of mortality; however, the average numbers of fatalities were low in both places ranging from 0.02 to 0.15 collisions/turbine. In Altamont Pass this was due to the high number of turbines involved in the area. In Tarifa, the two main reasons were that the wind farms were installed in topographical bottlenecks where large number of migrating and local birds can be flying at the same time through mountain passes, or because of the use of wind by soaring birds to gain lift over ridges. In Navarra, studies of almost 1,000 wind turbines and including all types of birds, showed a detected mortality rate between 0.1 to 0.6 collisions per turbine and year. Raptors were the bird group more affected (78.2%) during spring followed by migrant passerines during postbreeding migration time (Sept.-Oct)

At global level, it can be accepted that many wind farms show low rates of mortality by collision (Drewitt and Langston, 2006). However, even these low collision mortality rates for threatened or vulnerable species could be significant and make it harder for a particular species to survive.

Comparative study over birds' mortality by anthropogenic causes was carried out by Erickson et al. (2002). The next table shows the distribution by human activities:

Table 2.2: Anthropogenic birds' mortality:

Causes Bird deaths (per 10,000 bird deaths)
Building/ windows 5,500
Cats 1,000
Other 1,000
High tension lines 800
Vehicles 700
Pesticides 700
Communication towers 250
Wind turbines 0.75

A more recent study stated current wind energy developments are only responsible for 0.003% of bird mortalities caused by anthropogenic activities.

Concerning habitat disturbance, the construction and operation of wind farms could potentially disturb birds and displace them from around the wind farm site. The first step in analysing the disturbance is to define the size of the potential disturbance zone.

Wind turbines can trigger flight reactions on birds avoiding the wind farm area. Potential disturbance distances have been studied by several authors giving an average of 300 m during the breeding season and 800 m at other seasons of the year. Approximately 2% of all flights at hub height showed a sudden change of direction in the proximity of wind farm. An indirect negative impact of wind farms include a possible reduction in the available area for nesting and feeding by birds avoiding wind farm installations.

During construction, species can be displaced from their original habitat, but in most cases they return during the operational phase. However, exclusions may occur for other species during the breeding period.

Mitigation measures to minimise impacts vary by sites and by species, but common findings have been defined by reviewing available literature.

  • Important zones of conservation and sensitivity areas must be avoided.
  • Sensitive habitats have to be protected by implementing appropriate working practices.
  • An environmental monitoring programme before, during and post-construction will provide the needed information to evaluate the impact on birds.
  • Adequate design of wind farms: siting turbines close together and grouping turbines to avoid an alignment perpendicular to main flight paths.
  • Provide corridors between clusters of wind turbines when necessary.
  • Increasing the visibility of rotor blades.
  • Underground transmission cables installation, especially in sensitive areas, where possible.
  • Overhead cables more visible using deflectors and avoiding use in areas of high bird concentrations, especially for species vulnerable to collision.
  • Implement habitat enhancement for species using the site.
  • Adequate environmental training for site personnel.
  • Presence of biologist or ecologist during construction in sensitive locations.
  • Relocation of conflictive turbines.
  • Stop operation during peak migration periods.
  • Rotor speed reduction in critical periods.
  Sitemap | Partners | Disclaimer | Contact

coordinated by

EWEA

supported by

Intelligent Energy Europ

The sole responsibility for the content of this webpage lies with the authors. It does not necessarily reflect the opinion of the European Communities. The European Commission is not responsible for any use that maybe made of the information contained therein.