HomeTECHNOLOGYWind resource estimation ╗ Wind atlases

Wind atlases


Figure 2.1 shows the onshore wind energy resource, as computed on a broad scale for the European Wind Atlas.  The map shows different wind speed regions.  The wind speeds at a 50 m height above ground level within the regions identified, may be estimated for different topographic conditions using the table below the figure.  

The wind speed above which commercial exploitation can take place varies according to the specific market conditions.  While countries, such as Scotland, clearly have exceptional potential, with rising fuel prices and consequently increasing power prices every European country has a substantial technically and economically exploitable wind resource.

Figure 2.1 European Wind Atlas, Onshore, Source, Ris° National Laboratory, Denmark, see Appendix E for colour version

Figure 2.1 European Wind Atlas, Onshore, Source, Risø National Laboratory, Denmark, see Appendix E for colour version

The European Wind Atlas employs meteorological data from a selection of monitoring stations, and shows the distribution of wind speeds on a broad scale.  It has been used extensively by developers and governments in estimating the size of the resource and regional variations.  It is possible to map wind speeds at a higher resolution, using for instance more detailed topographical data and a larger sample size of meteorological data, in order to show more local variations in wind speed. This can be used by developers looking for sites in a particular country.

There are many examples of national, regional and local wind atlases, for Europeand the rest of the world; but they are far too numerous to mention here.  When investigating a particular region or country regarding its development potential, one of the first questions is always – is there a wind atlas for this area?

A review of national wind atlases for European countries has been undertaken for this edition of “Wind Energy – The Facts,” the results of which are shown in Table 2.1.  Where obtained and permission granted, map reproductions are contained in Appendix A.  The European Wind Atlas resulted in the development of a wind-mapping tool called WAsP, and this is used widely for both broad-scale wind mapping and more site-specific applications.

Table 2.1 distinguishes between the use of WAsP and “other” wind mapping methods.

Table 2.1 Wind Atlases, Europe, Source, Mortensen, N., G., Heathfield, N., H., Myllerup,L., Landberg, L., Rathmann, O.: Wind Atlas Analysis and Application Program: WAsP 9 Help Facility

Country Coverage in the European Wind Atlas Other WAsP Application Other model
Austria   [1]  
Bulgaria     [14]
Czech Republic   [1]  
Denmark [2] [3]
Estonia   [15]

[16, 17 ]

Finland   [4]  
Greece   [6]
Hungary   [1] [18]
Ireland [7] [8]
Italy   [9, 10]
Latvia   [15] [19]
Lithuania   [15]  
The Netherlands ü    
Poland     [20]
Romania     [21]
Slovakia   [1]  
Slovenia   [1]  
Sweden   [11]  
UK   [12]
Turkey     [22]
Armenia     [23]
Croatia   [1]  


Norway     [13]
Russia   [25]  
Switzerland     [26]

Sources for 1-26, see references


Wind atlases for offshore are covered in Chapter 5: Offshore.

<< Regional wind resources Local wind resource assessment and energy analysis >>
  Sitemap | Partners | Disclaimer | Contact

coordinated by


supported by

Intelligent Energy Europ

The sole responsibility for the content of this webpage lies with the authors. It does not necessarily reflect the opinion of the European Communities. The European Commission is not responsible for any use that maybe made of the information contained therein.