MAIN PUBLICATION :



Home » TECHNOLOGY » Wind farm design » Factors affecting turbine location » Visual influence

Visual influence

‘Visual influence’ is the term used for the visibility of the wind turbines from the surrounding area.

In many countries the visual influence of a wind farm on the landscape is an important issue especially in regions with high population density.  The use of computational design tools allows the Zone of Visual Influence (ZVI), or visibility footprint, to be calculated to identify from where the wind farm will be visible.  It is usually necessary to agree a number of cases with the permitting authorities or other interested parties, such as:

  • Locations from which 50% of turbine hubs can be seen
  • Locations from which at least one hub can be seen
  • Locations from which at least one blade tip can be seen

Figure 4.2 shows an example ZVI for a wind farm, generated using a WFDT. The variation in colours represents the proportion of the wind farm that is visible from view points anywhere in the wind farm vicinity.


Figure 4.2 A wind farm ZVI generated using a WFDT (Garrad Hassan)

Figure 4.2 A wind farm ZVI generated using a WFDT (Garrad Hassan)

Such maps tend to exaggerate the actual visual effect of the wind farm, as they do not clearly indicate the effect of distance on the visual appearance of the wind farm.  They are also difficult for non-specialists to interpret.  Therefore it is also common to generate ‘visualisations’ of the appearance of the wind farm from defined viewpoints.  These can take the form of ‘wireframe’ representations of the topography.  With more work, photomontages can be produced in which the wind turbines are superimposed upon photographs taken from the defined viewpoints.

Figure 4.3 shows an example wireframe representation of a wind farm generated using a WFDT.  Figure 4.4 shows the same image after rendering software has been applied and Figure 4.5 shows the same image as a photomontage.


Figure 4.3 Wireframe generated using a WFDT (Garrad Hassan)

Figure 4.3 Wireframe generated using a WFDT (Garrad Hassan)

 


Figure 4.4 Rendered wireframe generated using a WFDT (Garrad Hassan)

Figure 4.4 Rendered wireframe generated using a WFDT (Garrad Hassan)

 


Figure 4.5 Photomontage generated using a WFDT (Garrad Hassan)

Figure 4.5 Photomontage generated using a WFDT (Garrad Hassan)

Other factors also affect the visual appearance of a wind farm.  Larger turbines rotate more slowly than smaller ones, and a wind farm of fewer larger turbines are usually preferable to a wind farm of many smaller ones.  In some surroundings, a regular area or straight line may be preferable compared to an irregular layout.

<< Optimisation of energy production Noise >>
  Sitemap | Partners | Disclaimer | Contact

coordinated by

EWEA

supported by

Intelligent Energy Europ

The sole responsibility for the content of this webpage lies with the authors. It does not necessarily reflect the opinion of the European Communities. The European Commission is not responsible for any use that maybe made of the information contained therein.